Wavtech link6 6-channel line output converter and summing processor

Your aftermarket processors and amplifiers need clean and robust line-level input signals, especially when getting them from a factory amplifier's speaker outputs. Wāvtech's link6 line output converter can produce up to 10 volts of output per channel — which should be more than enough for most connected aftermarket gear.

6-channel summing processor

The link6's six channels can get routed into a number of different configurations. For example, the link6 will work great in a factory system with separately powered tweeters, midrange drivers, and woofers.

Multi-function remote and auxiliary input

Wāvtech lets you plug your phone or player directly into the link6's Auxiliary input to make it a music source. The wired remote lets you select sources as well as control the master volume, the Aux level, and the independent channels 5/6, usually used for subs.

Works with factory amps

Those speaker-level inputs can handle up to 40 volts, the equivalent of 400 watts, so you can use one in a premium system with a factory amplifier. This way, you can retain all your vehicle's factory audio options and warnings when installing a new aftermarket amplifier. The link6's gain controls and clip lights help you keep the signal level under control and distortion-free.

Product highlights:

• active 6-channel line output converter and summing processor
• designed to work with factory systems
• wired remote and 16-foot cable included
  • multi-function remote controls master volume, Aux volume, Ch 5/6 volume, and source selection
• provides up to 10Vrms output per channel
• 3.5mm Aux and speaker-level inputs
  • selectable speaker-level input sensitivity (20V or 40V) via internal jumper
• auto turn-on via DC offset or audio detect
• gain controls and clip lights
• select for 2, 4, or 6 input channels
• 2-way signal summing with subwoofer signal pass-through

More Info:

• aluminum chassis
• 12-volt turn-on lead output
• speaker-level inputs feature load resistance to prevent factory stereo shut-down
• optional plug-in parallel load resistors available for vehicles like some newer Chrysler vehicles that need less resistance for the factory stereo's load-sensing to work
• wiring, fuse, and hardware not included with device
  • 18-gauge power and ground leads and a 1-amp fuse recommended
• dimensions:
  • processor: 5.8"W x 1.1"H x 4.7"D (not including terminals and jacks)
  • remote: 1-1/8"W x 1-1/2"H x 1-13/16"D