1-4 DAYS DELIVERY
XpressKit DLPK Interfaces with the factory door lock and alarm controls on select 2000-up vehicles with CAN BUS system
100% ORIGINAL AND QUALITY
24 MONTHS GUARANTEE
- Description
- Shipping and Refund
XpressKit DLPK Interfaces with the factory door lock and alarm controls on select 2000-up vehicles with CAN BUS system
XpressKit DLPK
XpressKit modules work with your vehicle's anti-theft system to incorporate the convenience, security and luxury features of your Python™ alarm system. An XpressKit interfaces with your vehicle by routing commands through its vehicle data system, so it's more secure. You have fewer wires to connect and, best of all, your extra key stays with you, not in your car.
Timesaving kit
The DLPK XpressKit is a door lock interface kit that works with a wide range of 2000-up vehicles with the CAN BUS system. The compact module comes with harnesses and a built-in transponder data interface port. In addition to performing door lock functions, this kit also provides data immobilizer bypass for Nissan, Infinity, and GM vehicles with no additional parts required. This module can also alert your security/remote start system on the status of your hood, door, and trunk, greatly reducing the connections required on some vehicles.
Product highlights:
- door lock interface kit for 2000-up vehicles with the CAN BUS system
- door lock and factory alarm control via data
- compatible with push-to-start vehicles
- works with any remote start or security system
- Data 2 Data compatible with Python systems (minimizes connections between the security system and the DLPK kit)
- required for installations with the BMW, Ranger Rover/Volvo, or Audi/VW ignition interfaces
What's in the box:
- D2D CAN interface module
- 22" Wiring harness (with 10-pin connector on one end and bare wire on other end)
- 22" Wiring harness (with 4-pin connector on one end and bar wire on other end)
- 18" Wiring harness (with 4-pin connectors on each end)
- Installation Guide